Introduction and installation method of stainless steel clamp pipe fittings

Sanitary stainless steel clamp fittings are designed and manufactured for applications requiring corrosion resistance and ozone resistance. The nut threads of stainless steel joints are silver plated and pre-lubricated. The smaller size of the nut thread uses a wax seal, which not only effectively eliminates the "biting" of the stainless steel thread, but also reduces the assembly tightening torque by 40%.

Sanitary stainless steel clamp fittings are easy to operate and do not require professional techniques. For the majority of users, the installation method of stainless steel clamps is the first condition to be measured when purchasing clamps. Nowadays, with the continuous development of technology, the clamps have been widely used in our daily life, and it is The simple operation type meets the needs of many users and can be easily installed without professional technology, thus winning the trust of more and more users.

The correct installation method for sanitary stainless steel clamp fittings:

(1) The spattering impurities during the welding of the end pipe and the snap ring affect the end pipe seal. Before installation, the weld slag on the sealing surface should be removed to ensure the sealing effect.

(2) In the case where the position of the snap ring is determined, the size of the gap between the two pipe ends is determined by calculation based on the elongation of the pipe and the ambient temperature at the time of construction. Dimensional deviations should be ensured during construction.

(3) To control the distance L of the snap ring from the end pipe. The control of L should be combined with the instruction manual. When the gap between the two pipe ends is small, it is necessary to ensure that the snap ring just sticks to the inclined surface.

(4) Under the premise of a certain moving distance, the weld height and width of the snap ring and the end tube are welded, and the perpendicularity error between the snap ring plane and the end tube axis is larger, and the smaller the expansion and contraction amount of the joint is, the worse the use effect is. The steel parts are made of stainless steel, the rubber is made of food rubber, and the sanitary quality is high. The diameter of the valve body is equal to the inner diameter of the pipe. When the valve body is narrow, the flow-type valve plate is in the same direction as the fluid. The flow rate is large and the resistance is small, and no material accumulates.